manualshive.com logo in svg

Xerox WorkCentre 4260 Series, User Manual

The Xerox WorkCentre 4260 Series is a high-performance multifunction printer designed for efficient office workflows. To help you get started, an Installation Manual is available for free download at manualshive.com, providing step-by-step instructions for seamless setup and configuration. Upgrade your productivity with this reliable printing solution.

Share
Download
background image

12

Maintenance 

Xerox WorkCentre 4260 User Guide

201

If the feature is enabled, a message will appear on the display screen advising you 
to replace the Print Cartridge. If you want to replace the Print Cartridge now, open 
the front door. The instructions on the screen will tell you how to fit a new cartridge. 

If you do not want to replace the Print Cartridge now you can select the 

Abort

 

button. The machine will continue to operate but will NOT make copies or prints.

1.

Open the cover on the right side of the machine. This will reveal the latch used 
to open the front cover. Open the front cover.

2.

Remove the Print Cartridge.

The instructions that are packed with the 
new Print Cartridge will tell you how to 
dispose of the used Print Cartridge.

WARNING: 

Only install the correct 

Xerox Print Cartridge in the machine.

3.

Before unpacking the new Print 
Cartridge, shake well to distribute 
the toner. Remove from packaging.

4.

To fit the new Print Cartridge, make sure the toner is facing the correct way up

5.

Insert the Print Cartridge.

6.

Close the front cover.

7.

Select the 

Confirm

 button on the machine display.

 

If after fitting a new 

Print Cartridge the front 
door will not close, check 
that the Print Cartridge is 
positioned and latched 
correctly.

If you have replaced the Print Cartridge as a result of a “Replace the Print 
Cartridge” message on the machine display, the machine will assume that you 
have fitted a new cartridge and reset the toner usage counters and messages. If, 
however, you have fitted a new Print Cartridge without being instructed to do so 
by the machine display, the toner usage counters will need to be reset manually. 
This is done in the Access tools mode using the 

Supplies Management - Print 

Cartridge Re-order Notification

 feature.

Staple Cartridge

This procedure shows you how to remove a used Staple Cartridge and replace it 
with a new Staple Cartridge.

Front cover latch

Print Cartridge

Summary of Contents for WorkCentre 4260 Series









































































































































































































































Reviews:

No comments

Related manuals for WorkCentre 4260 Series

Magicard Pronto Getting Started Manual preview
Pronto
Brand: Magicard Pages: 26
QMS 3260 Operation preview
3260
Brand: QMS Pages: 194
Xerox AS/400 Installation And Setup Manual preview
AS/400
Brand: Xerox Pages: 23
IBM 6400 Series Operator'S Manual preview
6400 Series
Brand: IBM Pages: 113
IBM 6400 Series Owner'S Manual preview
6400 Series
Brand: IBM Pages: 16
IBM 6400 Series User Manual preview
6400 Series
Brand: IBM Pages: 214
Lexmark C910 Finisher Manual preview
C910 Finisher
Brand: Lexmark Pages: 11
BIO RAD VERSADOC User Manual preview
VERSADOC
Brand: BIO RAD Pages: 61
POS-TECHNOLOGY PT80USEWB User Manual preview
PT80USEWB
Brand: POS-TECHNOLOGY Pages: 40
Oki B700 Series Installation Instructions preview
B700 Series
Brand: Oki Pages: 4
Xerox Phaser 5550 Quick Use Manual preview
Phaser 5550
Brand: Xerox Pages: 6
Oki CX3535 Safety Information Manual preview
CX3535
Brand: Oki Pages: 64
SPRT SP-POS5810 User Manual preview
SP-POS5810
Brand: SPRT Pages: 12
Fuji Xerox ApeosPort-IV C5580 Administrator'S Manual preview
ApeosPort-IV C5580
Brand: Fuji Xerox Pages: 739
Ricoh D124 Detailed Descriptions Manual preview
D124
Brand: Ricoh Pages: 177
Lexmark Optra W810 Service Manual preview
Optra W810
Brand: Lexmark Pages: 489
Canon MultiPASS C530 Quick Start Manual preview
MultiPASS C530
Brand: Canon Pages: 8
Canon MultiPASS F30 Reference Manual preview
MultiPASS F30
Brand: Canon Pages: 58

Brands by name

Popular brands

Load more brands