Xerox WorkCentre 4260 Series User Manual Download Page 210

Page: 210 / 232

Maintenance

202

Xerox WorkCentre 4260 User Guide

Open the Staple
Cartridge cover at
the front of the
machine.

Pull on the handle
to remove the
empty Staple
Cartridge.

Remove the used
Staple Cartridge from the cartridge
holder.

Dispose of the used Staple Cartridge.

Remove the new Staple Cartridge from
its packaging.

Make sure that the staple strips on top
of the stack are complete and flat.
Remove any partial strips and any strips that are bent.

Insert the new Staple Cartridge into the cartridge holder, and push the Staple
Cartridge in firmly until it clicks into position.

Close the Staple Cover door.

Staple Cartridge
cover

Summary of Contents for WorkCentre 4260 Series









































































































































































































































Search results

Summary of Contents for WorkCentre 4260 Series

Reviews:

Related manuals for WorkCentre 4260 Series

Brands by name

Popular brands

Xerox WorkCentre 4260 Series, User Manual

Search results

Summary of Contents for WorkCentre 4260 Series

Reviews:

Related manuals for WorkCentre 4260 Series

Brands by name

Popular brands