Xerox WorkCentre 4260 Series User Manual Download Page 60

Page: 60 / 232

Copy

Xerox WorkCentre 4260 User Guide

Image Shift

This feature enables the position of the image on the page to be adjusted.

Off:

The image position is not adjusted.

Auto Center:

Automatically centres the scanned image on the output paper.

Margin Shift:

Creates a binding edge for the document. The image can be

adjusted up or down on the page and/or shifted to the right or left. Use the

up/

down

and

left/right

scroll buttons to adjust the amount of shift. The image can be

shifted between 0 and 0.80", in 0.1" increments.

Edge Erase

Use this feature to “refresh” the quality of an original that has become torn or
frayed at the edges, or that has hole punch, staple or other marks.

Summary of Contents for WorkCentre 4260 Series









































































































































































































































Search results

Summary of Contents for WorkCentre 4260 Series

Reviews:

Related manuals for WorkCentre 4260 Series

Brands by name

Popular brands

Xerox WorkCentre 4260 Series, User Manual

Search results

Summary of Contents for WorkCentre 4260 Series

Reviews:

Related manuals for WorkCentre 4260 Series

Brands by name

Popular brands