Xerox WorkCentre 4260 Series, User Manual

Page: 134 / 232

7 Store File
126 Xerox WorkCentre 4260 User Guide
Store File Procedure
1 Load the Documents
You can load the documents to be scanned either on the Document Glass or
through the Document Feeder.
Document Feeder:
The following steps explain how to load documents using the document feeder:
1.
Before loading the documents into the document feeder, ensure they are in
good condition and remove all staples and paper clips.
2.
Insert the documents neatly into the
document feeder, face up.
3.
Place the stack in the middle of the
guides aligning the left edge with the
document feeder tray, and position
the guides to just touch the edge of
the documents.
Document Glass:
The following steps explain how to load documents using the document glass:
1.
Raise the document feeder.
2.
Place the document face down on the document glass, aligned with the tip of
the registration arrow near the top left of the document glass.
3.
Lower the document feeder.
Registration
Arrow