Network Connectivity
11.
For Connection Timeout, type the amount of time to wait before the connection times out.
12.
To prefer IPv6 addresses when both IPv6 and IPv4 addresses are available, select
DNS Resolution
via IPv6 First
. This field is available when you select Dual Stack IP mode.
13.
Under WINS Server, for IPv4 and Dual Stack modes:
a.
To set the WINS server address using DHCP, select
Get WINS Server Address
. When enabled,
WINS Server information entered on this page is ignored.
b.
For Primary WINS Server Address, type an address. The format is x.x.x.x, where x represents a
decimal number from 0 through 255. Ensure that the value entered is a valid address and does
not start with 127 or a number from 224 through 254. A value of all zeros indicates that no
server is configured. If both primary and secondary name servers are undefined, the printer
broadcasts (peer-to-peer) name recognition.
c.
For Secondary WINS Server Address, type an address. The format is x.x.x.x, where x represents a
decimal number from 0 through 255. Ensure that the value entered is a valid address and does
not start with 127 or a number from 224 through 254. A value of all zeros indicates that no
server is configured. If both primary and secondary name servers are undefined, the printer
broadcasts (peer-to-peer) name recognition.
14.
Click
Save Changes
.
15.
For the new settings to take effect, restart your printer.
34
Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer
System Administrator Guide
