Xerox Versant 80 Press User Manual Download Page 202

Page: 202 / 382

Press Paper Jams

Paper Jams Inside the Press

Warning

Never touch a labeled area (found on the fuser unit or nearby) indicating High
Temperature andCaution. Contact can lead to burns.

1. Open the press Front Door.

2. Rotate Handle 2 to the right until it is in the horizontal position, and then pull out

the transfer module.

3. Remove the visible jammed paper.
4. After clearing the jammed sheets, ensure that no torn paper pieces are left in the

machine.

5. Move Handle 2b and remove any jammed paper.

6. Return Handle 2b to its original position.
7. Move Handle 2e and remove any jammed paper.

8. Return Handle 2e to its original position.

Xerox

Versant

80 Press

14-40

User Guide

Press Problem Solving

Summary of Contents for Versant 80 Press































































































































































































































































































































































































Search results

Summary of Contents for Versant 80 Press

Reviews:

Related manuals for Versant 80 Press

Brands by name

Popular brands

Xerox Versant 80 Press, User Manual

Search results

Summary of Contents for Versant 80 Press

Reviews:

Related manuals for Versant 80 Press

Brands by name

Popular brands