Xerox Versant 80 Press, User Manual

Page: 172 / 382

Suggested Solutions Problem
• Ensure that the paper is loaded correctly and within press spe-
cifications: set the horizontal and vertical paper guides to the
correct positions and ensure the paper tray guides are against
the edges of the loaded paper. Push the tray in completely.
• Create or use an existing Alignment profile.
Image on the printed out-
put is skewed or crooked
• Check that the paper weight settings at the print server match
the actual paper loaded in the tray.
• Ensure that the paper loaded is within press specifications. Go
to the Paper information section for information on paper and
storage. Load a new ream of paper into the selected paper tray.
• Run the Clean Fuser Assembly routine.
Unfused dry ink/toner on
the output; not permanent
and smears and rubs off
• Ensure that the paper tray guides are flush against the edges
of the loaded paper.
• Check that the stock meets the RML requirements.
• Alignment settings may need to be optimized for the media.
Create or use an existing Alignment Profile.
Misregistration or Image
Shift
• Run the Density Uniformity Adjustment routine.
• Create a custom stock and use it.
• If output is still unacceptable, contact the Customer Support
Center.
Trail edge of output con-
tains dry ink/toner dele-
tions, density inconsistency,
or is lacking in color depth;
this occurs mainly when us-
ing heavier or lighter weight
stock
Fault Codes
Press Fault Codes
If printing ended abnormally, or a malfunction occurred in the press, then a fault code
is displayed. If a fault code appears on the press screen and it is not listed in the table
below, or if a fault persists after following the listed solution, then contact your Xerox
Customer Support Center. If a fault code is displayed, all print data on the press as well
as print data stored in the system’s built-in memory is discarded.
Recommended solution Possible cause Fault code Fault Area
Remove unnecessary data
from the hard disk to increase
free disk space. Unable to process the job
template due to insufficient
hard disk space. 002-770 General
Xerox ® Versant ® 80 Press 14-10
User Guide
Press Problem Solving