Xerox Versant 80 Press User Manual Download Page 235

Page: 235 / 382

OHCF Paper Jams at Lever 1b and Knob 1c (Trays 6 and 7)

1. Open the front cover of the OHCF.

2. Move the lever 1b to the right and turn the knob 1c to the right. Remove the jammed

paper.

Note

If paper is torn, check inside the machine and remove it.

3. Return the lever 1b to the original position.

4. Close the front cover of the OHCF.

Note

If the front cover of the OHCF is not completely closed, a message will appear and
the machine will not operate.

OHCF Paper Jams at Lever 1d and Knob 1c (Trays 6 and 7)

1. Open the front cover of the OHCF.

17-11

Xerox

Versant

80 Press

User Guide

1- or 2-Tray Oversized High Capacity Feeder (OHCF / Trays 6 and 7)

Summary of Contents for Versant 80 Press































































































































































































































































































































































































Search results

Summary of Contents for Versant 80 Press

Reviews:

Related manuals for Versant 80 Press

Brands by name

Popular brands

Xerox Versant 80 Press, User Manual

Search results

Summary of Contents for Versant 80 Press

Reviews:

Related manuals for Versant 80 Press

Brands by name

Popular brands