Xerox Versant 80 Press User Manual Download Page 313

Page: 313 / 382

4. Close the HCS Front Cover.
5. Press the Unload button on the HCS control panel.

Wait until the Unload indicator lights before opening the HCS front door.

6. Open the HCS front door.
7. Pull out the Stacker Tray / Cart and gently remove the jammed paper.

8. Push the Stacker Tray / Cart straight into the HCS.
9. Close the front door.

10. If the press UI indicates there is a jam in the print engine, follow the instructions on

the screen to remove any paper in the area indicated.

11. Follow the instructions displayed on the UI to resume printing.

HCS Top Tray Jam (E7)

Perform the following steps to clear the jam and resume printing:
1. Remove any output delivered to the Top Tray.

2. Open the HCS Front Cover.

23-7

Xerox

Versant

80 Press

User Guide

High Capacity Stacker (HCS)

Summary of Contents for Versant 80 Press































































































































































































































































































































































































Search results

Summary of Contents for Versant 80 Press

Reviews:

Related manuals for Versant 80 Press

Brands by name

Popular brands

Xerox Versant 80 Press, User Manual

Search results

Summary of Contents for Versant 80 Press

Reviews:

Related manuals for Versant 80 Press

Brands by name

Popular brands