Xerox Versant 80 Press User Manual Download Page 338

Page: 338 / 382

Paper Jams at Lever 2b and Knob 2c

1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.

3. Move the lever 2b and turn the knob 2c; remove the jammed paper.

Note

If paper is torn, check inside the machine and remove it.

4. Return the lever 2b to its original position.

5. Close the right cover on the finisher.

Note

A message will display and the machine will not operate if the right cover is open
even slightly.

Paper Jams at 2c, 2e, 2f, and 2d

1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.

Xerox

Versant

80 Press

24-22

User Guide

Standard Finisher / Booklet Maker Finisher

Summary of Contents for Versant 80 Press































































































































































































































































































































































































Search results

Summary of Contents for Versant 80 Press

Reviews:

Related manuals for Versant 80 Press

Brands by name

Popular brands

Xerox Versant 80 Press, User Manual

Search results

Summary of Contents for Versant 80 Press

Reviews:

Related manuals for Versant 80 Press

Brands by name

Popular brands