Xerox Versant 80 Press, User Manual

Page: 220 / 382

• It holds a maximum of 2000 sheets of 20lb./75 gsm paper
• Stock must be loaded only in LEF direction
• Do not load materials above the MAX line
1. Select the appropriate paper stock for your job.
2. Pull out the tray slowly until it stops.
3. Open the ream of paper with the seam side facing up.
4. Fan the sheets before loading them into the tray.
5. Load the paper in the tray.
a) Align the edge of the paper against the RIGHT edge of the tray.
b) Move the paper guides to just touch the edges of the paper stack.
Do not load materials above the MAX line.
6. Gently push in the tray until it comes to a stop.
If enabled by your System Administrator, the Paper Tray settings screen may be
displayed on the UI.
7. If changes have been made to the paper tray, select the Change Settings button;
otherwise, proceed to the next step.
a) Make the desired selections for Paper Type/Paper Weight, Paper Size, and
Paper Color.
b) If necessary, make the desired changes to paper curl and alignment adjustment.
Note
Refer to the System Administration Guide for detailed information on the paper
curl and alignment adjustment options.
c) Select Save until you are returned to the tray settings window.
8. Select Confirm to close the window.
HCF Problem Solving
Fault Codes - High Capacity Feeder (Tray 6)
If an error caused the printing to end abnormally, or a malfunction occurred in the
machine, then an error code is displayed. When an error code is displayed, all print data
of the machine as well as print data stored in the machine's built-in memory is discarded.
Xerox ® Versant ® 80 Press 16-2
User Guide
1-Tray High Capacity Feeder (HCF / Tray 6), Letter-Size / A4 Only