Xerox Versant 80 Press, User Manual

Page: 175 / 382

Recommended solution Possible cause Fault code Fault Area
Check print options and spe-
cify the print data again. If
the hard disk is malfunction-
ing, contact your Xerox Cus-
tomer Support Center. Delayed print documents
cannot be registered. 016-710
Increase resolution or scan
area size. The machine is unable to
process size, because the
specified document area is
too small. 016-712
Perform one of the following:
• When printing by auto-
matic tray selection, set
one of the paper types to
a setting other than
Automatic Tray Switch-
ing > Off in Paper Type
Priority.
• Check print data.
An error occurred during
print processing. Probable
causes are as follows:
• Printing was instructed
by automatic tray selec-
tion when Paper Type
Priority is set to Auto-
matic Tray Switching >
Off for all paper in the
Common Service Set-
tings.
• ESC/P command error
016-721
Retry printing after waiting
for a period. Attempted to print Job
Template List while updat-
ing the job template. 016-735
Specify the printable paper
size for booklet creation. Booklet Creation is not ap-
plied to the specified paper. 016-738
Specify the combination of
the printable document and
paper size for booklet cre-
ation. The specified document and
paper size are an unauthor-
ized combination. 016-739
Specify the printable paper
tray for booklet creation. Booklet Creation is not ap-
plied to the specified paper
tray. 016-740
Reduce the number of pages
of print data, for example, by
dividing up the print data or
printing one copy at a time
when making multiple copies. Printing is not possible due
to insufficient hard disk
space. 016-748
Cancel the printing prohibited
specification using Adobe
Reader, and try to print again. Attempted to process PDF
file which was specified to
printing prohibited. 016-755
14-13 Xerox ® Versant ® 80 Press
User Guide
Press Problem Solving