Xerox Versant 80 Press User Manual Download Page 261

Page: 261 / 382

2. Using the green handle, pull out unit 4until it stops.

3. To remove the jammed paper, turn green knob 4 in either direction as shown.

Note

If the paper is torn, remove all torn pieces from the finisher.

4. Return unit 4 to its original position.

5. Close the front door of the Business Ready Finisher.

Clearing Jams in the Booklet Tray

1. Open the front door of the Business Ready Finisher.
2. To release the jammed paper, turn green knob 4 in the direction shown.

3. To remove the paper, pull it in the direction shown.

Note

If the paper is torn, remove all torn pieces from the finisher.

4. Close the front door of the Business Ready Finisher.

19-9

Xerox

Versant

80 Press

User Guide

Business Ready (BR) Finisher and Optional Booklet Maker

Summary of Contents for Versant 80 Press































































































































































































































































































































































































Search results

Summary of Contents for Versant 80 Press

Reviews:

Related manuals for Versant 80 Press

Brands by name

Popular brands

Xerox Versant 80 Press, User Manual

Search results

Summary of Contents for Versant 80 Press

Reviews:

Related manuals for Versant 80 Press

Brands by name

Popular brands