Xerox Versant 80 Press User Manual Download Page 330

Page: 330 / 382

Note

A message is displayed and the machine does not operate if the cover is open even
slightly.

Paper Jams at Finisher Top Tray

1. Make sure that the machine has stopped printing.
2. Remove jammed paper from the finisher top tray.

Note

If paper is torn, check inside the machine and remove it.

3. Open and close the finisher right cover.

Note

The machine will not operate if the cover is open even slightly.

Paper Jams at Finisher Stacker Tray

1. Make sure that the machine has stopped printing.
2. Remove jammed paper from the finisher stacker tray.

Note

If paper is torn, check inside the machine and remove it.

Xerox

Versant

80 Press

24-14

User Guide

Standard Finisher / Booklet Maker Finisher

Summary of Contents for Versant 80 Press































































































































































































































































































































































































Search results

Summary of Contents for Versant 80 Press

Reviews:

Related manuals for Versant 80 Press

Brands by name

Popular brands

Xerox Versant 80 Press, User Manual

Search results

Summary of Contents for Versant 80 Press

Reviews:

Related manuals for Versant 80 Press

Brands by name

Popular brands