Xerox Versant 80 Press, User Manual

Page: 318 / 382

Standard Finisher / Booklet Maker Finisher Main Components
The Standard Finisher / Booklet Maker Finisher is comprised of the following components:
Note
Unless otherwise indicated, components apply to both finishers.
1 Standard Staple Cartridge
Remove this cartridge to replace staples and clear staple jams.
2 Staple Waste Container
Remove this container when it is full.
3 Top Tray
The Top Tray is used for stacked output, and can receive up to 500 sheets of 20 lb. /
80 gsm paper. Output is delivered here when specific output features are selected, such
as Automatic sorting, Collated, Uncollated, or Normal.
4 Stacker (middle) Tray
The Stacker Tray is used for offset and / or stapled output, and can hold up to 2000
sheets of 20 lb. / 80 gsm paper. This tray also receives sheets when you punch and
Z-fold. Both the Top and Stacker Trays can be used for hole punched output (optional).
5 Booklet Output Tray
This is available only with the Booklet Maker Finisher. The Booklet Tray receives
saddle-stitched booklets when you select Single Fold or Single Fold + Stapling.
6 Booklet Output Tray Button
This is available only with the Booklet Maker Finisher. When you press this button, the
Booklet Output Tray is raised so you can retrieve booklets from the output area.
7 Right Cover
Open to clear paper jams, replace staples, clear jammed staples, or remove the scraps
from the puncher.
8 Staple Cartridges for Booklet Maker
This second stapler is available only with the Booklet Maker Finisher. There are two
staple cartridges for the booklet. Remove this cartridge to replace staples and clear
staple jams.
9 Punch Scrap Container
Collects the scraps from the puncher. Open to remove the scraps.
10 C / Z Fold Output Tray (optional)
The optional C / Z Folder tray receives sheets when you select C-folding or Z-folding of
8.5 x 11 in. / A4 output and 11 x 17 in. / A3 media.
Xerox ® Versant ® 80 Press 24-2
User Guide
Standard Finisher / Booklet Maker Finisher