Xerox Versant 80 Press, User Manual

Page: 156 / 382

3. From the Supplies pull-down menu, select Other Consumables to view the status of
other consumables, such as the drum cartridges the Dry Ink/Toner Waste Bottle, and
any applicable optional devices (such as the OHCF feed rolls).
Note
The status of the Fuser and Suction Filter are not shown, but a message displays
when these items require replacing.
Replacing a Dry Ink/Toner Cartridge
Note
The dry ink/toner cartridge can be replaced while a job is printing.
Note
After you replace a dry ink/toner cartridge, the system automatically resets the usuage
counter to zero (0) for this CRU. Check the Consumables Supplies screen to verify the
reset and new status.
1. Open the Dry Ink/Toner cover, located just above the press front door.
2. Lay paper on the floor before removing the cartridge. This will allow any excess dry
ink/toner to fall on the paper.
3. Grasp the handle of the dry ink/toner cartridge matching the color indicated in the
message.
4. Remove the dry ink/toner cartridge by slowly and gently pulling it straight out. While
pulling out, hold the bottom of the cartridge with your other hand to give it support.
5. Dispose of or recycle the cartridge per your local authorities and regulations.
In the United States, also refer to the Electronic Industries Alliance website:
www.eiae.org . For more information about Xerox environmental programs, go to
www.xerox.com/environment .
6. Remove the new dry ink/toner cartridge from its packaging.
Xerox ® Versant ® 80 Press 13-8
User Guide
Press Maintenance