Xerox VersaLink C505S, User Manual

Page: 179 / 238

Automatic 2-Sided Printing Problems
Solutions Probable Causes
Ensure that you are using a supported paper
size and weight for 2-sided printing. Envelopes,
cardstock, and labels cannot be used for
2–sided printing. For details, refer to
Supported
Paper Types and Weights for Automatic 2-Sided
Printing
.
Unsupported or incorrect paper.
Ensure that your printer supports automatic 2-
sided printing. For details, refer to
Printer Con-
figurations and Options .
Your printer model is not configured with
automatic 2-sided printing.
In the print driver Printing Options tab, select
2–Sided Print. Incorrect setting.
Printer is Making Unusual Noises
Solutions Probable Causes
Power off the printer and remove the obstruc-
tion or debris. If you cannot remove the obstruc-
tion, contact your Xerox representative. There is an obstruction or debris inside the
printer.
Paper Tray Will Not Close
Solutions Probable Causes
The paper tray does not fully close.
• If the tray is extended for legal-size paper,
the tray protrudes when it is inserted into
the printer. For details, refer to
Configuring
Tray 1 and Trays 2–5 for the Paper Length .
• Some debris or an object is blocking the
tray.
• The tray is blocked by the table or shelf on
which it is located.
• If the paper lift at the back of the tray is not
locked down, replace the tray.
Condensation has Formed Inside the Printer
Moisture can condense inside a printer where the humidity is above 85% or when a cold
printer is located in a warm room. Condensation can form in a printer after it has been
sitting in a cold room that is heated quickly.
8-5 Xerox ® VersaLink ® C505 Multifunction Printer
User Guide
Troubleshooting