Xerox VersaLink C505S, User Manual

Page: 193 / 238

Solutions Probable Causes
You can print envelopes from the Bypass tray
or Tray 1.
For details, refer to
Envelopes .
Envelopes are loaded incorrectly.
Envelopes are wrinkling.
• The heat and pressure of the laser printing
process can cause wrinkling.
• Use supported envelopes. For details, refer
to Guidelines for Printing Envelopes .
Note
When you load envelopes long-edge feed, en-
sure that you specify landscape orientation in
the print driver.
Paper Jam Message Stays On
Solutions Probable Causes
Recheck the media path and make sure that
you have removed all of the jammed paper. Some paper remains jammed in the printer.
Check the doors on the printer. Close any door
that is open. One of the printer doors is open.
Note
Check for, and remove, torn pieces of paper in the paper path.
Jams During Automatic 2-Sided Printing
Solutions Probable Causes
Use paper of the correct size, thickness, or type.
For details, refer to
Supported Paper Types and
Weights for Automatic 2-Sided Printing .
Using paper of the wrong size, thickness, or
type.
Ensure that paper is loaded into the correct
tray. For details, refer to
Supported Paper .
Paper is loaded in the wrong tray.
Load the tray with only one type and size of
paper. Tray is loaded with mixed paper.
Print-Quality Problems
Your printer is designed to produce consistently high-quality prints. If you observe
print-quality problems, use the information in this section to troubleshoot the problem.
For more information, go to
www.xerox.com/office/VLC505support .
8-19 Xerox ® VersaLink ® C505 Multifunction Printer
User Guide
Troubleshooting