manualshive.com logo in svg

Xerox Phaser 790, Documentation

Share
Download
Xerox Phaser 790 Documentation Download Page 472

23.  Problem Solving

Network Problem Solving

23-48

Xerox Phaser 790

Printing problems

On a Windows workstation

Setting up printing on Windows
NT 4.0 Workstations

If you have problems installing the Printer with
Windows NT 4.0, try installing another
PostScript Printer (such as the Apple Laser
Writer II g) and then install the Printer.
Installing another Printer ensures that all files
are properly installed and available.

For additional details, refer to the Windows
NT 4.0 documentation or the Adobe README
file (ReadMeNT.txt) included in the prntdrvr
folder on the User Software CD.

Reinstalling the Adobe
PostScript Printer Driver on
Windows 95/98 or Windows
2000

If you are reinstalling the Adobe PostScript
Printer Driver, delete any previous versions
and related files before installing. Search for
and delete all files named Efax.* in the
Windows\System folder.

For additional details, refer to the Adobe
README file (ReadMe9x.doc) included in the
prntdrvr folder on the User Software CD.

Problems with the Fiery utilities
on Windows 95/98, Windows
2000 or Windows NT 4.0

1.  If you are using Windows 95/98 or

Windows 2000, ensure that IPX/SPX and
TCP/IP networking protocols are enabled.

2.  If you are using Windows NT 4.0, ensure

that the TCP/IP networking protocol is
enabled.

3.  Ensure that the connection is configured

correctly for your site.

To check the current configuration, launch
a Fiery utility and select 

Open

 from the

File

 menu. Select the 

Printer

 and 

Modify

to see current settings. If the settings are
incorrect, you can change them in this
dialog box.

Summary of Contents for Phaser 790































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands