manualshive.com logo in svg

Xerox Phaser 790, Documentation

Share
Download
Xerox Phaser 790 Documentation Download Page 237

11.  Installing user software in a Windows NT 4.0 environment

Xerox Phaser 790

11–25

Installing additional software for Windows NT 4.0

You can copy additional color files from the User Software CD to your
hard disk. Many of the files are PostScript files that you can download
and print using WebDownloader.

•

 

ICM folder

—ICM monitor setting file and device profiles specially

designed for use with the printer.

•

 

Clrfiles folder

 (inside English folder)—Cmyk.ps, an 11-page, letter-

size PostScript file to use for reference when defining CMYK colors
in applications. Pantone.ps, a 19-page, letter-size PostScript file
that indicates the closest equivalent of PANTONE coated colors
that the printer can produce. The method used to print the
Pantone.ps file differs depending on the Spot Color Matching
setting.

You can print Rgb_01.doc from Microsoft Word 97 or later to view
RGB colors. You can print Rgb_02.ppt from PowerPoint 6.0 or
later to view available RGB colors.

•

 

Calibrat folder

 (inside English/Clrfiles folder)—Four PostScript

measurements files of color patches: Custom21.ps, Custom34.ps,
Stand21.ps, and Stand34.ps. The numbers in the file names refer
to the number of patches on the page. The Custom files are
provided to enable you to download measurement patches that
incorporate the current calibration set of the printer. The Standard
files are provided to enable you to download standard
measurement patches that ignore the current calibration set for the
printer.

These files are provided for expert users and should not be used for day-to-
day calibration.

Summary of Contents for Phaser 790































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands