manualshive.com logo in svg

Xerox Phaser 790, Documentation

Share
Download
Xerox Phaser 790 Documentation Download Page 350

17.  Managing print jobs at the Command WorkStation

Xerox Phaser 790

17–14

To transfer jobs between color servers:

1. 

Log in to more than one color server, as described above.

To transfer jobs between color servers, both color servers must
support the Send to <

Server

> command.

2. 

In the Queues window of the source color server, select the job(s)
you want to transfer.

You can select any 

held

 jobs in the Spool or RIP areas.

3. 

Select the Send to <

Server

> command from the Job menu.

The actual command contains the name of the other color server
currently connected to the Command WorkStation; for example,
Send to Aero_DC2006. If two or more additional color servers (in
addition to the originating server) are connected to the Command
WorkStation, multiple Send to <

Server

> commands display in the

Job menu.

Jobs are transferred from the source server to the same area on
the target server (from Spool to Spool, from RIP to RIP).

You cannot perform any other Command WorkStation functions
while files are being transferred between servers.

4. 

After verifying that the jobs were successfully transferred, you can
delete them from the originating server, if you wish.

Summary of Contents for Phaser 790































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands