manualshive.com logo in svg

Xerox Phaser 790, Documentation

Share
Download
Xerox Phaser 790 Documentation Download Page 247

12.  Installing user software in a Macintosh OS environment

Xerox Phaser 790

12–7

4. 

If prompted, select 

Quit

 to close the software installer.

In order to use ColorWise Pro Tools or Fiery Link, you must have
Mac OS Runtime for Java (MRJ2.1.4) installed on your
workstation. If you do not have MRJ installed, the ColorWise Pro
Tools or Fiery Link installer automatically initiates the MRJ 2.1.4
installation process.

For more information about ColorWise Pro Tools, refer to the
chapter 

ColorWise Pro Tools

. For more information about Fiery

Link, refer to the chapter 

Installing the Fiery software for Windows

and Macintosh

.

Installing Mac OS Runtime for Java

1. 

Read the Apple Computer, Inc. License Agreement and select

Agree

 to install the software.

2. 

Select 

Install

.

3. 

Select 

Quit

.

You are now ready to configure the ColorWise Pro Tools
connection to the printer.

Summary of Contents for Phaser 790































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands