Xerox Phaser 790, Documentation

Page: 253 / 542

Xerox Phaser 790 13–1
Installing the Fiery software
for Windows and Macintosh
The User Software CD includes software installers for Fiery Link. Fiery
utility software is supported on Windows 95/98, Windows 2000,
Windows NT 4.0 and Macintosh and must be separately installed on
each user workstation.
The User Software CD includes the installer for the Command
WorkStation application. Command WorkStation software is supported
with Windows 95/98, Windows 2000 and Windows NT 4.0 only.
It should be installed only on workstations that are designated for
Command WorkStation use.
Fiery Link is supported only over TCP/IP.
Because the server is part of the printer unit, most references in this chapter
are simply to the
printer .
Installing the software
Installing the Fiery Link software
Before you begin the installation for Fiery Link, determine the following:
•
The location of the utility on the hard disk. By default, the installer
places Fiery Link in the Programs\Fiery folder.
•
The name of the utility folder in the Windows\Start Menu\ Programs
folder. By default, the installer names the folder Fiery .
1. Insert the User Software CD in your CD-ROM drive. Open the
CD-ROM drive icon.
2. Double-click Fiery Link and the Setup.exe file.
13