manualshive.com logo in svg

Xerox Phaser 790, Documentation

Share
Download
Xerox Phaser 790 Documentation Download Page 453

Adjusting the color

23.  Problem Solving

Xerox Phaser 790

23-29

11.  BEST PATCH (ROW) is displayed on the Printer Control Panel.  Use the

up and down arrow buttons to enter the number of the row that
corresponds to your circled selection.

12.  Press the 

Item/Enter 

button and perform one of the following steps:

•

 

If you enter any number other than 0, BEST PATCH (COL) appears

on the Control Panel.

a. 

Use the up and down arrow buttons to select the letter or
name of the column that corresponds to your circled selection.

b. 

Press the 

Item/Enter

 button.  PRINTING GRAY BALANCE

PAGE is displayed, and after a moment the page is delivered
the Printer Output Tray.

c. 

Select the color patch that is most like the gray, and perform
steps 2 and 3 again.

•

 

If you enter 0, PRINT COLOR TEST YES appears on the Control

Panel.

a. 

Press the 

Item/Enter 

button and, after a moment, the

Comparison Page is delivered to the output tray.

b. 

Go to part 3 Comparison Page.

3.  Comparison Page

The Comparison Page allows you to see the changes you that made during
the VisualCal adjustment.  On the page are four rows of color photographs.
The first row and the third row show the color setup before you selected
VisualCal.  Row two and row four show the color setup after the VisualCal
adjustment was completed.  Now you must decide which setup is preferred.

Perform one of the following steps:

•

 

If you are satisfied with your adjustments press the 

Item/Enter 

button.

VISUALCAL appears on the Control Panel.
The system saves your changes and after a moment READY is
displayed.

•

 

If you are not satisfied with your adjustments, press the down arrow
button and ensure that “No” is displayed on the Control Panel.

a. 

Press the 

Item/Enter 

button.  APPLY CHANGES DEFAULT

COLOR appears on the Control Panel.

b. 

Press the 

Item/Enter 

button again.  The system erases your

adjustments and returns to the color default settings.  After a
moment READY is displayed.

Summary of Contents for Phaser 790































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands