manualshive.com logo in svg

Xerox Phaser 790, Documentation

Share
Download
Xerox Phaser 790 Documentation Download Page 352

17.  Managing print jobs at the Command WorkStation

Xerox Phaser 790

17–16

5. 

Browse to the device and folder to which you want to archive the
job(s) and select 

OK

.

The Archive Options dialog box shows external devices as
available archive volumes.

6. 

If applicable, select 

Archive rasters

.

The Archive rasters option is dimmed for PostScript data jobs and
for jobs being archived to Server Internal.

Raster data files may be large and therefore may take
considerable time to archive.

7. 

Select an archive volume and select 

OK

.

To retrieve jobs archived to external devices, use the 

Import

command.

Copy or move the archived job to a new destination by right-
clicking the desired

 job

 and selecting 

Move To

 or 

Copy To

.

You cannot select the printer as the archive destination.
Additionally, if you archived the job by selecting Server Internal,
you cannot copy or move the archived job.

Summary of Contents for Phaser 790































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands