manualshive.com logo in svg

Xerox Phaser 790, Documentation

Share
Download
Xerox Phaser 790 Documentation Download Page 241

Xerox Phaser 790

12–1

Installing user software in a

Macintosh OS environment

Use the following instructions to install software and set up printing in a
Macintosh OS environment.

Your screens may vary from those illustrated in this chapter.

Because the server is part of the printer unit, most references in this chapter
are simply to the 

printer

.

General steps for installing the user software

•

 

Install the Adobe PostScript printer driver and PPD file from the
User Software CD.

•

 

Set up the Phaser 790 in the Chooser.

•

 

Install the printer and screen fonts.

•

 

Install the ColorSync™ profiles.

•

 

Copy additional color-reference and application-specific files from
the User Software CD as needed.

In addition to using the User Software CD, you can download printer
drivers with the Installer WebTool if the system administrator has
enabled Internet access to the Fiery). For instructions, refer to the
section 

Using the Installer WebTool

 in the chapter 

Using the Fiery

WebTools

.

After you download the printer files, the installation process is identical
to installing from the User Software CD.

12

Summary of Contents for Phaser 790































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands