manualshive.com logo in svg

Xerox Phaser 790, Documentation

Share
Download
Xerox Phaser 790 Documentation Download Page 357

Xerox Phaser 790

18–1

Using the Fiery WebTools

The Fiery utilities enable remote users to view server functions. Users
may also have the ability to manage jobs remotely if the system
administrator has assigned them such privileges.

This chapter provides an introduction to the Fiery WebTools, providing
a description of the tools and the procedure for accessing them.

Fiery WebTools Overview

Fiery WebTools reside on the Phaser 790 and can be accessed from
Windows 95/98, Windows 2000, Windows NT 4.0, and Mac OS client
workstations with Internet browsers that support the Java language.

The Fiery software has a home page that lets you view server
functions and manipulate jobs remotely.

Some of the functions, such as WebSpooler, may require a password if
the administrator has set Administrator and Operator passwords in
setup.

The Status, WebLink, and WebDownloader WebTools do not require
any special access privileges. As long as the administrator has
enabled Web Services in Setup and has provided users with the IP
address of the printer, anyone can use these WebTools.

18

Summary of Contents for Phaser 790































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands