manualshive.com logo in svg

Xerox Phaser 790, Documentation

Share
Download
Xerox Phaser 790 Documentation Download Page 110

5.  Connecting to the network

Xerox Phaser 790

5–10

Unix and Windows NT 4.0 workstations on a TCP/IP network

UNIX server

or workstation

Another

supported

protocol

Printer

TCP/IP (lpd and http)

TCP/IP client workstation

Windows NT 4.0 workstation

with TCP/IP loaded

TCP/IP (lpd) protocol

Printing on this network:
UNIX workstations with the TCP/IP (lpd) protocol
can print directly and act as host for shared printing

TCP/IP workstations can print through UNIX server
or directly; requires TCP/IP and the lpr print service
loaded

For running Fiery utilities and WebTools:
Only a Windows 95/98, NT 4.0, or Mac OS
workstation with TCP/IP loaded can use these
applications

Summary of Contents for Phaser 790































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands