page 30
PHASER 7300 CARE WORKSHEET
0
There are labels for clearing jams located under the top cover (A) and behind the front cover (B).
The following diagram provides the paper path locations for each of the alpha-numeric jam codes.
The Front Panel error messages for some jams can be misleading and confusing. Though there are
numerous Error Codes, jams are reported in only three categories: (1) Jam Inside Top Cover, (2)
Jam Inside Duplex Unit, and (3) Jam Inside Right Door. For each jam indicated, clear them as
follows:
1.
For Jam Inside Top Cover error messages:
■
Open right door A and check for paper or scraps in the B registration rollers
■
Open the Top Cover and check for paper or scraps in the Fuser, the Duplex Gate
Assembly, or in the A registration rollers at the front of the Transfer Unit
2.
For Jam Inside Right Door A error messages:
■
Open the right door and remove any paper or scraps
■
Open the Top Cover and check for paper or scraps in the A Registration Rollers or
Transfer Unit
3.
For Jam Inside Duplex Unit:
■
Open the duplex unit and remove any paper or scraps, especially the left side
Paper Ejection
Paper Transfer
Paper Feed
A Registration Exit Sensor
Fuser Exit Sensor
A Registration Entrance Sensor
B Registration Entrance Sensor
Multi-Purpose Tray
(MPT)
Misfeed from MPT
Misfeed from Tray 1
Misfeed from Duplex Unit
Duplex Input
Duplex Entry
Duplex Rear Sensor
Misfeed from Tray 2
Misfeed from Tray 3
Misfeed from Tray 4
Misfeed from Tray 5
Tray
1
Tray
2
Tray
3
Tray
4
Tray
5
Duplex Exit Sensor
Duplex Input Sensor
Duplex-in
Sensor
Stack Full Sensor
E12
A10
A7
B13
B8
A11
A22
A6
B21
E1
E2
E3
E4
E5
