PHASER 7300 SETUP WORKSHEET
version 1.0
page 11
Remove the Tape and Shipping Restraints
In this exercise, you will remove the tape and shipping restraints.
Remove Tape
Remove all of the packing tape from the printer. Tape is used to secure the Top Cover, the Left
Side Output Tray, the Multi-Purpose Tray, Tray 1, and optional Duplex Unit during shipment.
Remove Shipping Restraints
Remove the LED assembly shipping restraint from the Top Cover.
Install Options
In this exercise, you will install any available options.
If there are options for the printer that were purchased separately, install them now. The available
printer options include:
■
Hard Drive
■
RAM
■
Duplex Unit
Install the options.
Please refer to steps 3 through 6 of the
Phaser 7300 Color Printer Setup
Poster to complete this exercise.
When removing tape from the Left Side Output Tray and Multi-Purpose Tray,
be sure to hold them steady to avoid breaking the plastic.
To avoid print quality problems, avoid touching the polished lens surface on
the LED assemblies where light is emitted.
Please refer to the instruction sheets for each option to complete
this exercise.
