page 4
PHASER 7300 INTRODUCTION
version 1.0
Running the Training Program
To run the training program using the Phaser 7300 Customer Support Training CD-ROM:
1.
Insert the
Phaser 7300 Customer Support Training CD-ROM
into your computer.
2.
The CD-ROM is designed to autorun. If the autorun feature on your computer is
disabled, open the CD-ROM and double-click the
p7300.exe
icon to run the program.
3.
To begin the training, click the
Overview
or
Differences
link.
Browser
The training runs in a standard browser window. Microsoft Internet Explorer 5.0 is the
recommended browser, although other browsers may be used.
Macromedia Flash
The Macromedia Flash ActiveX Control/Plug-in must be installed on your computer to use the
training CD-ROM. If Flash is not detected by the training program, you will be prompted to run
the Flash installer.
Installing Flash
If Flash is not installed, use the following procedure to install Flash for your browser:
1.
Insert the
Phaser 7300 Customer Support Training CD-ROM
.
2.
Browse to the
installers
folder.
3.
For Internet Explorer, double-click the
InstallAXFlash.exe
program. For Netscape
Navigator, double-click the
flash32.exe
program.
4.
Follow the instructions to install Flash.
Adobe Acrobat Reader
Adobe Acrobat Reader is required to view the PDF documents contained on the Phaser 7300
Customer Support Training CD-ROM. If Acrobat Reader is not installed, use the following
procedure to install it on your computer:
1.
Insert the
Phaser 7300 Customer Support Training CD-ROM
.
2.
Browse to the
installers
folder.
3.
For Windows, double-click the
rp505enu.exe
program. For Macintosh, double-click
the
ar505enu.bin
program.
4.
Follow the instructions to install Acrobat Reader.
Supported Operating Systems
The following operating systems may be used to run the training program:
■
Windows 95, Windows 98, Windows Millennium Edition (Me)
■
Windows NT 4.0, Windows 2000, Windows XP
