Wiring
Phaser 3320 and WorkCentre 3315/3325
Xerox Internal Use Only
Service Manual
7-2
Printer Plug/Jack Designations
This chapter contains the plug/jack designators, locator diagrams, and wiring diagrams. The Plug/Jack
Locator diagrams show the P/J locations within the printer. Use these illustrations to locate
connections called out in the troubleshooting procedures.
1.
Locate the P/J connector designator in the first column of the table.
2.
With this information, go to the map listed in the Map column.
3.
Use the coordinates to locate the connection indicated on the map by its P/J designation number.
4.
The Remarks column provides a brief description of each connection.
Phaser 3320 Plug/Jack Designators
Phaser 3320 Plug and Jack Designators
P/J
Map
Coordinates Remarks
CN1
4
A-106
HVPS to Main Board
CON1
4
H-113
LVPS to AC Inlet
CN1
3
I-102
Laser Unit to Main Board
CN1
3
C-102
Main Motor to Control Panel
CN1
1
I-103
Main Board to Control Panel
CN1
2
G-107
Optional Tray Feeder Board to interim connector P/J6 to Main Board
CN2
1
H-103
Main Board to Wireless Board
CN2
1
B-105
Control Panel Board to Main Board
CN2
3
K-102
Laser Unit to Main Board
CON2
4
H-111
LVPS to Fuser
CON3
4
A-113
LVPS to Main Board
CN3
1
G-104
Main Board to HVPS
CN4
1
H-104
Main Board to Feed, Registration, and Paper Empty Sensors
CON4
4
A-112
LVPS to Main Board
CN5
1
I-102
Main Board to CRUM
CN6
1
J-103
Main Board to P/J30 to Fuser
CN6
1
B-112
Interim Connector Main Board to Feeder Board
CN7
1
G-107
Main Board to Laser
CN8
1
I-104
Main Board to Exit/Bin Full Sensor and Cover Interlock Switch
CN10
1
G-107
Main Board to Bypass Tray Clutch and Bypass Tray Paper Empty Sensor
CN11
1
I-105
Main Board to ENET Port
CN12
1
G-106
Main Board to Main Fan
CN13
1
F-108
Main Board to LVPS
CN14
1
I-106
Main Board to USB Port
CN15
1
F-109
Main Board to LVPS
CN18
1
I-108
Main Board to Thermostat
