![background image](http://html.mh-extra.com/html/xerox/phaser-2135/phaser-2135_advanced-features-and-troubleshooting-manual_885471135.webp)
122
Phaser Color Printer 2135
Networking
Step-by-Step Setup (AppleTalk)
Configuring EtherTalk at the Front Panel
To enable the EtherTalk protocol at your printer’s Front Panel, follow these steps:
1.
Press
Menu Up
or
Menu Down
until you see:
2.
Press
Item Up
or
Item Down
until you see:
3.
Press
Value Up
or
Value Dow
n. You should see:
4.
Press
Enter
. You should see:
5.
Press
On Line
. You should see:
6.
Restart the printer.
Selecting the Printer from the Chooser
Before you send a print job to the Phaser 2135 printer, make sure that it is selected as the
current printer in the Chooser.
1.
At the printer, print a Configuration Page and note the EtherTalk Name. Refer to the
Phaser 2135 Color Printer Quick Network Install Guide
for instructions.
2.
At your computer, select the APPLE in the upper left corner of the Desktop.
3.
Select the
Chooser
entry in the menu.
4.
Make sure that
AppleTalk
is active.
Menus
Ethernet Menu
Ethernet Menu
EtherTalk Enable
EtherTalk Enable
On
Ethernet Menu
EtherTalk Enable
Ready