![background image](http://html.mh-extra.com/html/xerox/phaser-2135/phaser-2135_advanced-features-and-troubleshooting-manual_885471122.webp)
Advanced Features and Troubleshooting Manual
109
Networking
Setting Default Gateway at the Front Panel
Note
Setting a Default Gateway can also be accomplished in CentreWare DP,
CentreWare MC, or CentreWare IS. Refer to
page 69
for more information.
1.
Press
Menu Up
or
Menu Down
until you see:
2.
Press
Item Up
or
Item Down
until you see:
3.
Press
Value Up
or
Value Down
. You should see:
4.
Press
Value Up
or
Value Down
to change the value of the character above the cursor.
The value is incremented or decremented by 1 each time the key is pressed. Holding
down
Value Up
or
Value Down
causes continuous scrolling through the values.
5.
To change other characters in the Default Gateway address, press
Item Up
or
Item
Down
to scroll right or left respectively through the character string, then press
Value
Up
or
Value Down
to change the value of the character above the cursor (as in Step 4).
6.
When you have completed setting the Default Gateway address, press
Enter
. You
should see:
7.
Press
On Line
. You should see:
Menus
Ethernet Menu
Ethernet Menu
Default Gateway
Default Gateway =
xxx.xxx.xxx.xxx
Ethernet Menu
Default Gateway
Ready