100
Phaser Color Printer 2135
Installation Precautions
6.
Secure the hard drive in place using four screws. If the screws don’t line up correctly
with the holes in the bottom of the hard drive, check alignment of the hard drive as
indicated in step 5 above
.
7.
Align the controller board with the printer’s guide channel and slide the board all the
way into the printer until it stops. Then replace the screws to secure the controller
board.
8.
Reconnect the power cord and all cables and turn on the printer.
9.
Print a Configuration Sheet (as described on
Printing the Printer’s Internal Pages
on
page 37) and confirm that the hard drive appears as an installed option. If any
problems occur, reinstall the drive. If problems persist, check the support links at:
www.xerox.com/officeprinting
/
infoSMART
for assistance.
Disk Initialization
The disk is preformatted and requires no initialization. The disk may be returned to its
initial state, with no loaded fonts, overlays or Secure Print/Proof Print jobs, by selecting
the Initialize Disk item from the Reset Menu.
2135-24