Xerox Phaser 2135 Advanced Features And Troubleshooting Manual Download Page 29

Page: 29 / 153

Phaser 2135 Color Printer

Printing Options

Printing Options

The following table displays a variety of options for submitting a file for printing,

depending upon your environment and preferences.

Method

Options

Description

Print directly from

application.

Through a direct connection The port is set to LPT1: (or

equivalent).

Through a network

The port is set to a network queue.

Through the mail port

monitor

The port is set to the Xerox Mail Port

Monitor and the printer has an email

address.

Print via a print file

submission

CentreWare DP

Send the print file to the printer using

TCP/IP networks only).

CentreWare for Solaris

Send the print file to the printer using

CentreWare for Solaris.

CentreWare TTY for UNIX

Send the print file to the printer using

CentreWare TTY for supported UNIX

platforms.

CentreWare Internet

Services

Send the print file to the printer using

CentreWare Internet Services

(embedded web server).

Attachment to email

Send the print file (PostScript, PCL,

PDF, TIFF) to the printer as an

attachment to a mail note (This option

requires that the printer has an email

address).

Summary of Contents for Phaser 2135


























































































































































Search results

Summary of Contents for Phaser 2135

Reviews:

Related manuals for Phaser 2135

Brands by name

Popular brands

Xerox Phaser 2135, Advanced Features And Troubleshooting Manual

Search results

Summary of Contents for Phaser 2135

Reviews:

Related manuals for Phaser 2135

Brands by name

Popular brands