manualshive.com logo in svg

Xerox Phaser 2135, Advanced Features And Troubleshooting Manual

Share
Download
Xerox Phaser 2135 Advanced Features And Troubleshooting Manual Download Page 39

26

Phaser 2135 Color Printer

Printer Drivers 

Negative Image

Converts the black image areas in the original to white, the white image areas to black, and 

any dark gray image areas to light gray. Printing a negative image may be useful for 
documents that have a substantial amount of dark background and/or light text and 

images. Color images are not changed by this option. It should only be used on black and 

white images.

Orientation

Specifies the direction of print on the page.

The options are:

■

Portrait

 

A Portrait page is taller than it is wide. This is the default setting.

■

Landscape

A Landscape page is wider than it is tall.

■

Rotated Landscape

A Rotated Landscape page is wider than it is tall and the image on the page is rotated 
180 degrees (upside down).

Summary of Contents for Phaser 2135


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands