44
Phaser 2135 Color Printer
Managing Printer Usage
Default Gateway
Sets the four byte Default Gateway address. (This menu item only appears if
IP Address Resolution
is set to
static
.)
Values:
xxx.xxx.xxx.xxx
where
xxx
=
000
to
255
Note
Once the front panel shows
Default Gateway
on the top line,
use the
Value Up
or
Value Down
keys (labeled 3 and 7) to scroll to
the desired value at the cursor location. To move the cursor, use
the
Item Up
or
Item Down
keys (labeled 2 and 6). Thus, you can
change characters within the address rather than having to re-enter
the entire address. The printer must be turned off and on before
the changes will take effect.
For more information, refer to the
Setting Network Addresses
section on
page 38
.
LPR Enable
Sets the Ethernet LPR protocol.
Values:
On
(default)
Off
LPR Banner
Sets the LPR banner sheet.
Values:
On
Off
(default)
LPR PDL
Sets the default page description language interpreter for the Ethernet LPR
protocol.
Values:
Auto
(default)
PCL
PostScript
Note
To submit TIFF and PDF files to the printer, this value must be
Auto
.
AppSocket Enable
Sets the Ethernet AppSocket interface.
Values:
On
(default)
Off
Ethernet Menu Items (cont'd.)
Menu Items
Description
