108
Phaser Color Printer 2135
Networking
Networking
Connecting to Your Network
Setting a Subnet Mask at the Front Panel
Note
Setting a Subnet Mask can also be accomplished in CentreWare DP, CentreWare
MC, or CentreWare IS. Refer to
page 69
for more information.
If your printer is connected to a WAN (Wide Area Network), you may restrict user access
by setting a Subnet Mask.
1.
Press
Menu Up
or
Menu Down
until you see:
2.
Press
Item Up
or
Item Down
until you see:
3.
Press
Value Up
or
Value Down
. You should see:
4.
Press
Value Up
or
Value Down
to change the value of the character above the cursor.
The value is incremented or decremented by 1 each time the key is pressed. Holding
down
Value Up
or
Value Down
causes continuous scrolling through the values.
5.
To change other characters in the Subnet Mask, press
Item Up
or
Item Down
to scroll
right or left respectively through the character string, then press
Value Up
or
Value
Down
to change the value of the character above the cursor (as in Step 4).
6.
When you have completed setting the IP address, press
Enter
. You should see:
7.
Press
On Line
. You should see:
Menus
Ethernet Menu
Ethernet Menu
Subnet Mask
Subnet Mask =
xxx.xxx.xxx.xxx
Ethernet Menu
IP Address
Ready