![background image](http://html.mh-extra.com/html/xerox/phaser-2135/phaser-2135_advanced-features-and-troubleshooting-manual_885471087.webp)
74
Phaser 2135 Color Printer
Adjusting Color Density and Balance
2.
Press
Item Up
or
Item Down
(labeled 2 and 6) until you see:
3.
Press
Value Up
or
Value Down
(labeled 3 and 7) until the
Value
is equal to the
number of the square identified in step 1.
4.
Press
Enter
(labeled 4). The Color Adjust Page prints showing you the changes that
resulted from the previous steps and the front panel displays:
5.
Repeat Steps 3 and 4 above until the bar and background patterns in the Current (0)
square blend together.
Color Balance Adjustment
1.
Identify the numbered circle that most closely matches the gray of the background. If
this square is the Current (0) square, no adjustment is needed. Continue to
Color
Density Adjustment
.
2.
Press
Item Up
or
Item Down
(labeled 2 and 6) until you see:
3.
Press
Value Up
or
Value Down
(labeled 3 and 7) until you see the number of the
circle that you identified in step 1.
4.
Press
Enter
(labeled 4). The Color Adjust Page prints showing you the changes that
resulted from the previous steps and the front panel displays:
5.
Repeat Steps 3 and 4 above until the bar and background patterns in the Current (0)
square blend together.
Color Adjust Menu
Black Density
Black Density =
New Value
Color Adjust Menu
Black Density
Color Adjust
Color Balance
Color Balance
=
New Value
Color Adjust Menu
Color Density