A u t o m a t i c T r a y S w i t c h i n g
C h a p t e r 2 : P a p e r H a n d l i n g
❖
2-21
Default Source Mapping Settings
Table 2.5 shows the Source Mapping settings in effect with
the base printer, as well as those when one or two Lower
Trays are installed.
Customizing Source Mapping Settings
You may change the Source Mapping settings to best fit your
printing needs. For example, you may want the printer to
automatically feed from the front tray when the main tray
becomes empty. The Source Mapping examples shown next
in this guide can help you customize Source Mapping
settings for your printing environment.
† These will default the same as the appropriate Lower Tray column if both Lower Tray(s) and Envelope Feeder are installed.
Table 2.5
Default Source Mapping settings
PCL Paper Source
Base
Configuration
One
Lower Tray
Two
Lower Trays
Envelope
Feeder
Upper
Main Tray
Main Tray
Main Tray
Main Tray
Manual
Front Tray
Front Tray
Front Tray
Front Tray
Manual Envelope
Front Tray
Front Tray
Front Tray
Envelope Feeder
Lower
Main Tray
Lower 1 Tray
Lower 2 Tray
Main Tray
†
Large Capacity
Main-Front
Lower 1-Main
Lwr1-Lwr2-Main
Main-Front
†
Envelope Feeder
Front Tray
Front Tray
Front Tray
Envelope Feeder
Caution
Customizing your Source Mapping settings on the printer
may cause different trays to be used than are selected in your
printer drivers.
chapter2.frm Page 21 Friday, July 11, 1997 8:13 PM
