L o a d i n g P a p e r
2-14
❖
D o c u P r i n t 4 5 1 7
/
4 5 1 7 m p U s e r G u i d e
Using the
High Capacity
Feeder
The optional High Capacity Feeder (HCF) holds 2,000 sheets
of 20 lb (75 g/m
2
) paper. Refer to the section
“Selecting
Paper”
(page 2-3) for acceptable paper sizes and weights.
(See
Appendix A
for ordering information and
Appendix C
for installation instructions.)
Note
When the HCF is installed, it can be accessed using your
existing applications/drivers as a “Lower Tray.”
Caution
•
Do not attempt to load the High Capacity Feeder during
printing.
•
Do not overfill the feeder.
1
Open the paper drawer, and wait until
tray fully lowers.
If you are not changing paper size, go to
Step 3 on page 2-15. Otherwise, continue
to Step 2.
2
Adjust the end and side paper guides for
paper size.
Ensure that both the top and bottom of the
paper guides are seated into the correct
size slots.
chapter2.frm Page 14 Friday, July 11, 1997 8:13 PM
