C o n t r o l P a n e l M e s s a g e s
6-10
❖
D o c u P r i n t 4 5 1 7
/
4 5 1 7 m p U s e r G u i d e
Envelope Feeder
Envelopes need to be loaded in the Envelope Feeder.
ACTION:
The message on the bottom line of the Control Panel display advises
what envelopes to load.
Env Feeder Empty
The Envelope Feeder is empty.
ACTION:
Load envelopes in the Envelope Feeder.
Env. Feeder Fail
Service Required
The Envelope Feeder has failed. Printing from the Envelope Feeder cannot
continue.
ACTION:
Remove and reinstall the Envelope Feeder following the instructions in
Appendix C: Installing and Removing Printer Options
. If it still fails, you
still have the option of feeding envelopes through the front tray.
Contact your dealer or Xerox/Rank Xerox.
EnvelFeeder Jam-
Remove All Envel
An envelope has jammed feeding from the Envelope Feeder. The message
alternates with:
Remove EnvFeeder
Open Front Cover
and
Remove Jam Envel
ACTION:
See
“Envelope Feeder Jam”
(page 6-32).
Ethernet Fail
The Ethernet card (XNIC-E’NET) has failed and cannot be used.
ACTION:
Press
Enter
to allow the printer to continue as if the Ethernet
card were not installed. This error is not subject to
Auto Continue
(page D-3). Print a Configuration Sheet. If the sheet does not show
Ethernet as present, contact your dealer or Xerox/Rank Xerox.
Fan Failure
Power Off NOW!
The printer’s fan has failed.
ACTION:
Power cycle the printer. If this message reappears, power off the
printer and contact your dealer or Xerox/Rank Xerox.
Feed A4
ACTION:
Feed A4 paper through the front tray, as indicated on the top line of
the display.
Feed A6
ACTION:
Feed A6 paper (international postcard) through the front tray, as
indicated on the top line of the display.
Feed Com-10
ACTION:
Feed Com-10 envelope through the front tray, as indicated on the top
line of the display.
Table 6.2
Control Panel messages
(continued)
Message
Description/Corrective Action
Table 6.2 Page 5 of 22
chapter6.frm Page 10 Friday, July 11, 1997 8:19 PM
