L o a d i n g P a p e r
2-16
❖
D o c u P r i n t 4 5 1 7
/
4 5 1 7 m p U s e r G u i d e
Using the
Envelope Feeder
The Envelope Feeder is an optional paper handling device
available for the DocuPrint 4517. Refer to Table 2.1 on
page 2-4 for acceptable envelope sizes.
(See
Appendix A
for ordering information and
Appendix C
for installation instructions.)
1
Slide out the envelope support.
2
Lift the envelope holder.
3
Stack the envelopes face up with the
stack against the feeder’s left edge.
For PCL applications:
The corner for the
return address should be on the left side of
the stack and trailing as the envelopes go
into the printer (as shown at left).
For PostScript applications:
Some
PostScript applications require that the
envelopes be loaded with the return
address corner on the right side of the
stack and leading as the envelopes go into
the printer. Test your application for
proper orientation.
Push the envelopes gently into the
printer. Do not force the envelopes
between the last two rollers (the
two that touch), as this may cause a
jam to occur.
chapter2.frm Page 16 Friday, July 11, 1997 8:13 PM
