C o n t r o l P a n e l M e s s a g e s
C h a p t e r 6 : T r o u b l e s h o o t i n g
❖
6-21
*Pg Protect Off*
The printer has turned Page Protection
Off
because there is insufficient memory to
process the job with page protection.
ACTION:
Add printer memory if you want to process future complex jobs with
Page Protection.
Power Saver
On
The printer has set itself to lower power mode (Power Saver is on). As soon as it
receives the next print job, the printer leaves power saver mode. If Power Saver is
on and the red Fault LED is blinking, you may need to power off/on the printer.
ACTION: None.
Press *
The printer has a PCL error.
ACTION: Press
Enter
.
This message functions with the System Menu option
Auto Continue
. When
Auto Continue
is set to
On
, this message is cleared automatically after ten
seconds, and normal printing operation resumes.
Press a key...
The printer has just been taken offline.
ACTION:
No more processing can take place until you press one of the
following keys: Menu, Reset, Online, or LastPage.
Press
↑
to Init.
Press
↓
to Abort
Either the hard disk’s partition block cannot be understood or it has a bad high
level format.
This message flashes alternately with either:
Unknown Disk
or
Disk Format Bad
ACTION:
Press
Up
to format the disk or press
Down
to abort.
Press
↑
to Init.
Press
↓
to Abort
Either the Xerox PCMCIA macro card’s partition block cannot be understood or it
has a bad high level format.
This message flashes alternately with either:
Unknown Macro
Lower Card
or
Unknown Macro
Upper Card
ACTION:
Press
Up
to format the card or press
Down
to abort.
Table 6.2
Control Panel messages
(continued)
Message
Description/Corrective Action
Table 6.2 Page 16 of 22
chapter6.frm Page 21 Friday, July 11, 1997 8:19 PM
