C o n t r o l P a n e l M e s s a g e s
6-22
❖
D o c u P r i n t 4 5 1 7
/
4 5 1 7 m p U s e r G u i d e
*Prntng Simplex*
The printer does not have enough memory to print the job as duplex, and will
print it as simplex. This message may appear under certain conditions when
printing simplex jobs if the Duplex Module option is installed.
ACTION:
None. The message clears when the next job starts.
Processing...
The printer is processing data from a computer for printing.
ACTION:
None.
PS Font List
Printing...
The list of PostScript fonts is printing.
ACTION:
Remove the PostScript Font List from the output tray when it has
finished printing.
Ready
The printer is online and waiting for data to print.
ACTION:
None.
Remove DuplxUnit
Clear Paper Path
A paper jam has occurred at the Duplex Module. The message alternates with the
message:
Paper Jam-
Open Rear Cover
ACTION:
See
“Duplex Module Jam”
(page 6-34).
Remove EnvFeeder
Open Front Cover
An Envelope Feeder jam has occurred. The message alternates with the messages:
EnvelFeeder Jam-
Remove All Envel
and:
Remove Jam Envel
ACTION:
See
“Envelope Feeder Jam”
(page 6-32).
Remove Jam Envel
An Envelope Feeder jam has occurred. The message alternates with the messages:
EnvelFeeder Jam-
Remove All Envel
and:
Remove EnvFeeder
Open Front Cover
ACTION:
See
“Envelope Feeder Jam”
(page 6-32).
Table 6.2
Control Panel messages
(continued)
Message
Description/Corrective Action
Table 6.2 Page 17 of 22
chapter6.frm Page 22 Friday, July 11, 1997 8:19 PM
