Book
TOC
Chapter
TOC
Search
Quit
7-19
Half of the
printed page is
blank.
•
The page layout is too complex. Simplify the page
layout, and remove any unnecessary graphics from
the document.
•
The page orientation setting may be incorrect.
Change the page orientation in the Print Setup
dialog box.
•
The paper size and the software paper size settings
do not match. Load the correct paper in the printer or
change the software paper size settings in the Print
Setup dialog box.
•
Scaling may be set to less than 100%. Change the
scaling setting in the Paper/Output dialog box.
•
The printer cable may be incorrect. Use or replace
the cable with an IEEE-1284 rated cable.
•
The ink cartridge may be empty.
The printer
prints the
wrong data, or
it prints
incorrect
characters.
•
The printer cable may be connected improperly.
Check the cable connection.
•
There may be a problem with the printer driver
software. Exit Windows and reboot the computer.
Turn the printer off and on.
•
The printer cable may be incorrect. Use or replace
the cable with an IEEE-1284 rated cable.
Symptom
Cause and Solution
Next Page
Previous Page
