Book
TOC
Chapter
TOC
Search
Quit
3-12
b)
Press 2 to turn this feature off (OFF).
Or
c)
Press 3 to print only when an error occurs and the
transmission was not successful (ERR).
If an error occurred during your fax transmission, an error
message appears in the display. If you receive an error message,
press Stop to clear the message and try to send the document
again.
For a listing of error messages and their meanings, see
Memory Transmission (Broadcasting)
With Memory Transmission (Memory TX), documents are stored
in memory and automatically sent to one or more remote stations.
Use this feature to send your documents to multiple locations.
You can store a maximum of ten fax numbers for a memory
transmission. If you need to send your fax to more than ten
locations, you can increase the number of fax locations dialed by
including a Group Dial number as one of the ten numbers.
After sending, the documents are automatically erased from
memory.
Next Page
Previous Page
