Book
TOC
Chapter
TOC
Search
Quit
3-20
Configuring Automatic Dialing Features
One-Touch Dialing
One-Touch dialing lets you use any one of the 20 One-Touch
buttons located on the left of the machine’s control panel to
automatically dial a number.
Storing a Number for One-Touch Dialing
1
When assigning a One-Touch number, press and hold the One-
Touch button (01 through 20) for 2 seconds. The display
shows TXX:, where "T" signifies you are assigning a One-
Touch number and "XX" designates the selected One-Touch
button.
If a number is already stored in the location, the display shows
the number in the upper line and 1:RENEW 2:OTHER in the
bottom line. Press 1 to delete the existing number or 2 to select
another One-Touch button.
2
Enter the number you want to store (up to 46 digits) using the
Number keypad, then press Start/Enter.
To insert a pause between numbers when dialing, press the
Redial/Pause button.
If you make a mistake while entering a number, use the Right or
Left buttons to move the cursor under the wrong digit, then
enter the correct digit, or press the Delete button.
Next Page
Previous Page
