Book
TOC
Chapter
TOC
Search
Quit
4-8
Receiving Automatically in ANS/FAX Mode
To use this mode, you must attach an answering machine to the
EXT jack on the left side of your machine.
1
Press the Receive button until the display indicates ANS/FAX.
Any incoming voice calls will be answered by the answering
machine. The caller can then leave a message on the answering
machine.
2
If a fax tone is detected on the line, the fax receive mode is
automatically activated.
Note:
If you set your machine to ANS/FAX mode and your
answering machine is switched off, or no answering machine is
connected to the Xerox WorkCentre 480cx, the machine will
automatically go into fax receive mode after six rings.
If your answering machine has a user-selectable ring counter, set it
to answer incoming calls after one ring.
If the machine is in TEL mode, and an answering machine is
connected to the machine, turn off the answering machine. This will
prevent the answering machine’s outgoing message from
interrupting your phone conversation.
Next Page
Previous Page
